| Model: | PE-4105 |
| Name: | Wireless Alarm Control Panel |
| Features: | |
1. Speech indication for all operation steps, English LCD screen 2. Enable to set Tel-line on / off status monitoring / turn to use
GSM transmit alarm automatically 3. Built-in GSM module, supports call or send out SMS message to
mobile phone when alarm had been triggered 4. Built-in door bell tone 5. Built-in high tone loudspeaker 6. Wireless frequency 433MHz/868MHz 7. Supports dual-way communication, enable connect 8 dual-way wired
or wireless keypad and 8 dual-way remote 8. Remote control via phone / voice alarm / 10 seconds for address
recording 9. Wireless device status inspection / wireless alarm linkage 10. Programmable 8 wired zones / 32 wireless zones / 32 BUS modules
for expandable (total 210 zones) 11. 32 channels electronic application control / 1 wireless siren /
2 wireless door bell 12. 2 alarm center phone number / 6 voice numbers / contact ID
protocol 13. Supports GSM module optional SMS alarm / arm / disarm / control
electronic appliance 14. Supports CID protocol upload / supports 4 or 6 digit user ID
code 15. 4 group timing arm / disarm setting / remotely arm / disarm /
listen to function 16. Arm / disarm status resume after power off 17. 150 alarm log and inquiry / 10 seconds for recording 18. Communication protocol to alarm center - Ademco / Contact ID 19. Inspections wireless device lose or low battery 20. Built-in rechargeable battery 12V/1200mA up to 8 hours when
power off 21. Included 15V/1000mA power adapter | |
| Parameter: | |
GSM Module Optional Send out SMS message to mobile phone when detector / sensor had
been triggered | |
Do you want to show products of your own company? Join FREE now!