1. Included wireless emitter / wireless metallic sensor / metallic
magnet
2. Power cable connected between wireless metallic sensor and
wireless emitter, when the wireless metallic sensor
is separated from metallic magnet more than 4.00cm, it will cause
short circuit and the alarm indicator will flash
and send alarm signal to the control panel
3. The starting control distance is < 60mm
4. Low voltage warning, the battery LED will be turn on when
voltage is lower than 8V
5. Power supply is DC 12V ~ 8.4V
6. Power consumption is standby 0.01W / alarm 0.09W
7. Power current is ≤20A, emitting current ≤15mA
8. Emitting frequency is f=315/433+-0.2MHz
9. Emitting distance is 200m (non obstacle distance)
10. Easy to install and use / low-power mode / low-voltage alarm
and anti-false alarm
11. Widely used in commercial shop / wholesale shop / maintainence
shop / warehouse and park area
